Government Contracts and Special Certificates

One of our strengths as ITB Partner is the special certifications and documents required in other country processes. 2007/46 E Marking Vehicle Type Approval, SASO Certificate with Other VOC (Verification of Conformity) Processes, Saber Program Certification (Saudi Arabia), Nigeria Soncap Certificate, Kenya PVOC Certificate, Algeria and Iraq contracts, CCC China Certificate Program, CARB Certificate.

2007/46 E Marking (Vehicle Type Approval)

Although the E mark is also called the ECE conformity mark, it is a marking and certification study that indicates that motor vehicles meet the requirements of the European Union on roads within the scope of approved components. The E Certificate states that motor vehicles and trailers are in compliance with the regulations accepted under EU, UN / EEC and TR laws regarding their parts, systems or separate technical units.

The symbol for the E symbol is a capital E in a circle and a smaller number on the right, indicating the country code. The number on the right represents the assigned code numbers of the countries associated with the ECE test mark regulation control number. For example, the E1 mark on the side of a product indicates that it has a German product E certificate.

The E mark indicates that it is in accordance with the directives and Regulations by the components, parts, systems and separate technical units (European economic community, united nations). It is a safety certificate required by the European Commission to apply to motor vehicles, technical parts and systems by the European Commission on the basis of EU directives. Test Laboratories must be an organization of the European Union member country with a technical service authority. The organization that issues the E mark is the state transport sector of the European Union member country. Products certified with the E mark are accepted by all EU member countries. Equipment that moves with technical products such as e-mark, vehicle air pump, vehicle message / under floor heating cushions, vehicle fans, vehicle water heaters, vehicle charger, vehicle lamp / flasher, vehicle cleaners, vehicle energy equipment are also mandatory.

SASO Certificate

In order to show that their products imported by Saudi Arabia comply with the SASO standard requirements, importers must provide a SASO Certificate issued by a surveillance agency approved by SASO. SASO Certificate is taken by the exporter for each shipment for products subject to pre-loading surveillance program.

For ASO Certification Application

  • Application form,
  • Invoice,
  • Product and Manufacturer Quality Certificates,
  • Test reports,

In the Application Form and Documents; Production Date, Delivery Method and Delivery Date, Destination Port, Quantity of Product , Invoice Amount, Place of Production, Address of Importer and Exporter, Product Description (Model, Brand, Design, etc.) should be written.

After the application documents are evaluated, surveillance is carried out. Afterwards, SASO Certificate is published by requesting a Final Invoice based on your upload.

Saber Program Certification (Saudi Arabia)

Saber is the government certification platform that records whether the products subject to import are eligible or not, made mandatory by SASO on 01.01.2019.

The certification process consists of 3 stages based on the registration of the products on the Saber platform

1- Factory Audit: It is decided whether Factory Audit is required according to the HS codes of the products. For products that require Factory Inspection, the inspection is made only once a year.

2- PCoC (Product Certificate): It must be issued separately for each buyer in Saudi Arabia. The document will be valid for 1 year, and the information of the products you will export is included in the scope of the document.

3- Shipment Certificate: After the shipment is completed, it is issued separately for each shipment based on the Commercial Invoice.

Nigeria Soncap Certificate

The aim of the program is to prevent low and unsafe products from entering Nigeria and to control the export of products according to Nigeria Standards Authority (SON) requirements, technical requirements. We can test and validate your products against the Nigerian Conformity Assessment Program (SONCAP) Standards Organization. The name of the final certificate is SONCAP.

Kenya PVOC Certificate

The PVOC program, which was put into effect by the Kenya Quality Agency KEBS, started on January 18, 2012 and pre-export certificate can be provided by our company. Key Features Goods imported to Kenya require a Certificate of Conformity (CoC). CoC is a mandatory document for every shipment. Kenya PVoC program ensures that the products to be exported meet the quality requirements, controls international trade, avoids customs delays and reduces losses that may occur by preventing the import of incompatible products. Our company, which has been managing the conformity assessment programs for many years, offers efficient and comprehensive solutions to ensure that shipments are in accordance with Kenya’s requirements.


Verification of ConfoAlgeria’s Certificate of Quality reduces the ability of goods to meet mandatory safety, quality and security requirements, activate international trade, avoid customs delays, and reduce potential losses from imports of non-compliant products. We issue a Product Conformity Certificate (COC) for products to be exported to Algeria: With our long years of experience in managing conformity assessment programs in the world, we offer effective and comprehensive solutions to your exporter to ensure that your shipments comply with Algeria’s requirements.


The program was initiated by the New Standard Company quality institution and was put into effect with the aim of checking whether the specified products meet the criteria before entering the country.

CCC (China Compulsory Certification) Certification

Although it is used for product quality standardization similar to the European CE system, there are important differences.

In order for products to enter the market in the People’s Republic of China, CCC Certificate must be obtained for both domestic and imported products.

There are more than 150 products under the CCC certificate.

Some of the products covered by this certificate;

Includes most electrical products such as ; Electrical wires and cables-Circuits, Switches for assembly protective and connection devices, Low voltage Electrical Apparatus, Small Power motors, Electrical tools, Welding machines, Household and similar electrical appliances, Audio and video equipment, Information technology devices, Lighting apparatus, Telecommunication Terminal Equipment, Motor vehicles and Safety parts, Motor vehicle tires, Safety Glasses, Agricultural Machinery, Latex Products, Medical Devices, Fire Fighting Equipment etc.

  • The CCC mark can be issued by certification bodies approved by the CNCA (Certification and Accreditation Authority).
  • CQC (China Quality Certification Center) covers most of CCC products except agricultural machinery, fire fighting equipment and Wireless Local Area Network (WLAN) systems.
  • CCAP (Automotive Products China Certification Center) covers automotive parts.

CARB Certificate

When the California Air Resources Board (CARB) adopts the “Airborne Toxin Control Measure to Reduce Formaldehyde Emissions from Composite Wood Products” (“ATCM”), compliance with formaldehyde emission standards has become more important than ever. CARB Phase-2 standards are made to reduce formaldehyde emissions in composite wood products.

Procedures for CARB Certificate are as follows;

Formaldehyde emission test on wooden panels and finished products

Determining Quality Control Limits

Qualified factory staff

Review of quality control guidelines

Factory Audits

Label review for manufacturers and manufacturers

On April 26, 2007, the California Air Resources Board (CARB) approved the Airborne Toxic Control Measure (ATCM), which aims to reduce formaldehyde emissions from composite wood products.

ATCM places different roles and obligations on panel manufacturers, distributors, importers, manufacturers and retailers.

The ATCM regulation consists of two emission standard stages and requires good documentation control on production quality management and formaldehyde emission standard compliance.

Manufactured products produced before the 1st and 2nd stages containing HWPW-VC, HWPWCC, PB, MDF or thin MDF may be put on the market, supplied, sold for the specified periods after the valid dates.

ATCM will be implemented by CARB or local air zone staff. Execution activities include facility audits, auditing of records, and securing samples for compliance testing.

WhatsApp İletişim